www.neons.org

Home of the Neon Enthusiast
It is currently Thu Sep 02, 2010 1:14 pm

All times are UTC - 5 hours [ DST ]


Adraenyse supports Neons.org. You can too.
Please support the companies that support Neons.org
For advertising inquiries, please click here for information


Post new topic Reply to topic  [ 23 posts ] 
Author Message
 Post subject: Dodge Intrepid Engine?
PostPosted: Wed Apr 29, 2009 8:28 pm 
Offline
Neon Enthusiast
User avatar

Joined: Mon Apr 07, 2008 12:04 pm
Posts: 268
Location: Plymouth, PA
Someone my step-father knows happens to be really good with working on neons. He said I could put an engine from a Dodge Intrepid in my neon. Would this work? Would I have to make new motor mounts? Anyone know what would be involved in this?

Thank you :)

_________________
BCoN wrote:
Real men row through gears.


Project Fuego: http://forums.neons.org/viewtopic.php?f=51&t=339698&p=2761034#p2761034


Top
 Profile  
 
 Post subject: Re: Dodge Intrepid Engine?
PostPosted: Wed Apr 29, 2009 8:41 pm 
Offline
Neon Enthusiast

Joined: Mon Jan 22, 2007 1:16 pm
Posts: 2558
Location: Ellaville, GA
that would be the 2.4 swap you hear so much about, unless he is referring to the newer 3.5...

_________________
96 SOHC Plymouth Highline 4-dr, ATX (for now...)- PQM dead...
96 SOHC Dodge Highline 4-dr, ATX- PQM under major surgery
98 SOHC Highline 2-dr, ATX - Intense Blue- sold and gone

Proud member of the .Org vigilante group!

99blackonblackrt wrote:
lol lets post an online how-to
break into a dodge neon in less that 5 minutes by: the neons.org group genious


Top
 Profile  
 
 Post subject: Re: Dodge Intrepid Engine?
PostPosted: Wed Apr 29, 2009 8:48 pm 
Offline
Neon Enthusiast
User avatar

Joined: Mon Apr 07, 2008 12:04 pm
Posts: 268
Location: Plymouth, PA
That's what I was thinking, but when I googled it, the only engines I could pull up for the Intrepid were a 3.3 v6 and a 3.5 v6. It said those were for a '93 to '97 Intrepid. :dunno:

_________________
BCoN wrote:
Real men row through gears.


Project Fuego: http://forums.neons.org/viewtopic.php?f=51&t=339698&p=2761034#p2761034


Top
 Profile  
 
 Post subject: Re: Dodge Intrepid Engine?
PostPosted: Wed Apr 29, 2009 8:49 pm 
Offline
Neon Enthusiast
User avatar

Joined: Wed Sep 17, 2008 12:48 pm
Posts: 559
I have a transmission from my 300m in my shop next to my neon motor, for *a#S!d^f* and gigglles I am going to see if the bell housing lines up. It would be difficult to make the 3.5 fit because they are mounted in the engine bay like a rwd motor.

_________________
PLEASE REMEMBER TO LEAVE ME FEEDBACK HERE: viewtopic.php?f=36&t=338837
98' BASE SOHC (12.5:1 2.2 forged stroker, crane 005, race ported magnum head, etc + N20!)


Top
 Profile  
 
 Post subject: Re: Dodge Intrepid Engine?
PostPosted: Wed Apr 29, 2009 8:50 pm 
Offline
Neon Enthusiast

Joined: Sun Jul 18, 2004 4:26 am
Posts: 3817
Location: St. Louis, MO
The Intrepids came with a 2.7, 3.3, or 3.5 engine. All were V6's. The 2.4 was never available in the Intrepids. The Intreprids have zero in common with the Neon. None of the 3 engines that came in the Intrepid have ever been swapped into a Neon.

_________________
95 SOHC ATX Sport Coupe: 3.55 MTX swap, 2.4DOHC swap, SuperD brackets, twiztidklown1 filled mounts, Vitor bobble, Booger Bushings, Depo Projectors, Prothane bushings, KYB GR2's, AMM 90-less lower, Mopar ECU, Hedman header, AFX UDP, Crane springs/retainers, SS valves.


Top
 Profile  
 
 Post subject: Re: Dodge Intrepid Engine?
PostPosted: Wed Apr 29, 2009 9:03 pm 
Offline
Neon Enthusiast

Joined: Mon Jan 22, 2007 1:16 pm
Posts: 2558
Location: Ellaville, GA
john doe wrote:
The Intrepids came with a 2.7, 3.3, or 3.5 engine. All were V6's. The 2.4 was never available in the Intrepids. The Intreprids have zero in common with the Neon. None of the 3 engines that came in the Intrepid have ever been swapped into a Neon.


ah correct... had stratus on my mind but it came out as intrepid. :blush:

_________________
96 SOHC Plymouth Highline 4-dr, ATX (for now...)- PQM dead...
96 SOHC Dodge Highline 4-dr, ATX- PQM under major surgery
98 SOHC Highline 2-dr, ATX - Intense Blue- sold and gone

Proud member of the .Org vigilante group!

99blackonblackrt wrote:
lol lets post an online how-to
break into a dodge neon in less that 5 minutes by: the neons.org group genious


Top
 Profile  
 
 Post subject: Re: Dodge Intrepid Engine?
PostPosted: Wed Apr 29, 2009 10:51 pm 
Offline
Neon Enthusiast
User avatar

Joined: Mon Apr 07, 2008 12:04 pm
Posts: 268
Location: Plymouth, PA
Great, thanks for the info :D

So, would it be possible to get the engine to swap if I made some custom motor mounts? I'm sure a SA ECM would probably be needed, but is there anything that would absolutely prevent this from being possible?

_________________
BCoN wrote:
Real men row through gears.


Project Fuego: http://forums.neons.org/viewtopic.php?f=51&t=339698&p=2761034#p2761034


Top
 Profile  
 
 Post subject: Re: Dodge Intrepid Engine?
PostPosted: Thu Apr 30, 2009 10:18 pm 
Offline
Neon Enthusiast
User avatar

Joined: Mon Apr 21, 2008 4:59 pm
Posts: 3926
Location: F.L.-Aye
fayt99 wrote:
that would be the 2.4 swap you hear so much about, unless he is referring to the newer 3.5...

no intrepid came from the factory that i know of with a 2.4L

_________________
-95 2.4L MTX DOHC SRT Turbo- dead
-95 Sport Coupe MTX dd currently a 2.0L SOHC
-97 2.0 MTX RaceCar, awaiting 2.4 DOHC
-03' SRT-4


feedback viewtopic.php?f=36&t=349782&p=2855307#p2855307

MO: Wide,Clean,& Low...theres no other option


Top
 Profile  
 
 Post subject: Re: Dodge Intrepid Engine?
PostPosted: Thu Apr 30, 2009 11:36 pm 
Offline
Neon Enthusiast

Joined: Sun Jul 18, 2004 4:26 am
Posts: 3817
Location: St. Louis, MO
Oddly enough I don't think the 2.4 would even be able to fit in the Intrepids engine bay. It is 1 cylinder longer then any of the engine options and it has a tall timing cover on the front to interfer with the sloping hood.

_________________
95 SOHC ATX Sport Coupe: 3.55 MTX swap, 2.4DOHC swap, SuperD brackets, twiztidklown1 filled mounts, Vitor bobble, Booger Bushings, Depo Projectors, Prothane bushings, KYB GR2's, AMM 90-less lower, Mopar ECU, Hedman header, AFX UDP, Crane springs/retainers, SS valves.


Top
 Profile  
 
 Post subject: Re: Dodge Intrepid Engine?
PostPosted: Thu Apr 30, 2009 11:47 pm 
Offline
Master Neon Mechanic
User avatar

Joined: Thu Jun 15, 2006 2:52 am
Posts: 10501
Location: Phoenix, AZ it's quite hot outside.
ShadowOfBlood wrote:
Great, thanks for the info :D

So, would it be possible to get the engine to swap if I made some custom motor mounts? I'm sure a SA ECM would probably be needed, but is there anything that would absolutely prevent this from being possible?



the engine and transmission are WAY to large for a neon engine bay.

_________________
F&S Fabrication 2.4L power steering brackets
1999 2.4L coupe now Corn fed


Top
 Profile  
 
 Post subject: Re: Dodge Intrepid Engine?
PostPosted: Fri May 01, 2009 12:00 am 
Offline
Neon Enthusiast
User avatar

Joined: Mon Apr 07, 2008 12:04 pm
Posts: 268
Location: Plymouth, PA
Thanks :)

So, what's the largest/most powerful engine I can swap into a neon?

_________________
BCoN wrote:
Real men row through gears.


Project Fuego: http://forums.neons.org/viewtopic.php?f=51&t=339698&p=2761034#p2761034


Top
 Profile  
 
 Post subject: Re: Dodge Intrepid Engine?
PostPosted: Fri May 01, 2009 1:05 am 
Offline
Neon Enthusiast

Joined: Sun Jul 18, 2004 4:26 am
Posts: 3817
Location: St. Louis, MO
2.4 bored and stroked to 2.7 with a big freakin' turbo on it.

What exactly do you want your car to do?

_________________
95 SOHC ATX Sport Coupe: 3.55 MTX swap, 2.4DOHC swap, SuperD brackets, twiztidklown1 filled mounts, Vitor bobble, Booger Bushings, Depo Projectors, Prothane bushings, KYB GR2's, AMM 90-less lower, Mopar ECU, Hedman header, AFX UDP, Crane springs/retainers, SS valves.


Top
 Profile  
 
 Post subject: Re: Dodge Intrepid Engine?
PostPosted: Fri May 01, 2009 1:08 am 
Offline
Neon Enthusiast
User avatar

Joined: Mon Apr 07, 2008 12:04 pm
Posts: 268
Location: Plymouth, PA
Eat Ponies... :pardon:

_________________
BCoN wrote:
Real men row through gears.


Project Fuego: http://forums.neons.org/viewtopic.php?f=51&t=339698&p=2761034#p2761034


Top
 Profile  
 
 Post subject: Re: Dodge Intrepid Engine?
PostPosted: Fri May 01, 2009 1:26 am 
Offline
Master Neon Mechanic
User avatar

Joined: Thu Jun 15, 2006 2:52 am
Posts: 10501
Location: Phoenix, AZ it's quite hot outside.
ShadowOfBlood wrote:
Thanks :)

So, what's the largest/most powerful engine I can swap into a neon?



you can make over 500HP with the engine in it now.

_________________
F&S Fabrication 2.4L power steering brackets
1999 2.4L coupe now Corn fed


Top
 Profile  
 
 Post subject: Re: Dodge Intrepid Engine?
PostPosted: Fri May 01, 2009 11:00 am 
Offline
Neon Enthusiast
User avatar

Joined: Mon Apr 07, 2008 12:04 pm
Posts: 268
Location: Plymouth, PA
I remember seeing a 4-cylinder on Streetfire putting out 1000+Hp. That thing was sick. Anyway, if I can put out 500HP by upgrading mine, shouldn't I be able to get more out of a 2.4? Sorry for the noob questions, but I'm learning as I go, lol. I'm a computer engineer and I find pretty much anything that I can build, upgrade, and make fast to be fascinating, lol.

_________________
BCoN wrote:
Real men row through gears.


Project Fuego: http://forums.neons.org/viewtopic.php?f=51&t=339698&p=2761034#p2761034


Top
 Profile  
 
 Post subject: Re: Dodge Intrepid Engine?
PostPosted: Fri May 01, 2009 11:44 am 
Offline
Neon Enthusiast

Joined: Sun Jul 18, 2004 4:26 am
Posts: 3817
Location: St. Louis, MO
What exactly are you wanting your car to do? If you just want to beat stock Mustang GT's then throw a turbo on your current engine, tune it well, and you're there. If you want to build a 500hp Neon building the engine is the easy thing. Order a top and bottem rebuild kit for the 2.4 from Modernperformance and the engine is there. The hard part is everthing else. The fuel, chassis, engine control, and tuning.

_________________
95 SOHC ATX Sport Coupe: 3.55 MTX swap, 2.4DOHC swap, SuperD brackets, twiztidklown1 filled mounts, Vitor bobble, Booger Bushings, Depo Projectors, Prothane bushings, KYB GR2's, AMM 90-less lower, Mopar ECU, Hedman header, AFX UDP, Crane springs/retainers, SS valves.


Top
 Profile  
 
 Post subject: Re: Dodge Intrepid Engine?
PostPosted: Fri May 01, 2009 1:25 pm 
Offline
Neon Enthusiast
User avatar

Joined: Mon Apr 07, 2008 12:04 pm
Posts: 268
Location: Plymouth, PA
Sorry for the vagueness :pardon:

Anyway, my goal is to get as much power out of it as I can while keeping it street-legal. I don't like standards, so I'm not aiming for a competition car. I'm more interested in building a very fast machine that I can still use to get my groceries :grin:

_________________
BCoN wrote:
Real men row through gears.


Project Fuego: http://forums.neons.org/viewtopic.php?f=51&t=339698&p=2761034#p2761034


Top
 Profile  
 
 Post subject: Re: Dodge Intrepid Engine?
PostPosted: Fri May 01, 2009 1:32 pm 
Offline
Neon Enthusiast
User avatar

Joined: Wed Sep 17, 2008 12:48 pm
Posts: 559
ShadowOfBlood wrote:
Sorry for the vagueness :pardon:

Anyway, my goal is to get as much power out of it as I can while keeping it street-legal. I don't like standards, so I'm not aiming for a competition car. I'm more interested in building a very fast machine that I can still use to get my groceries :grin:



whats your budget?

_________________
PLEASE REMEMBER TO LEAVE ME FEEDBACK HERE: viewtopic.php?f=36&t=338837
98' BASE SOHC (12.5:1 2.2 forged stroker, crane 005, race ported magnum head, etc + N20!)


Top
 Profile  
 
 Post subject: Re: Dodge Intrepid Engine?
PostPosted: Fri May 01, 2009 2:03 pm 
Offline
Neon Enthusiast
User avatar

Joined: Mon Apr 07, 2008 12:04 pm
Posts: 268
Location: Plymouth, PA
I'm doing this over time, so budget's not really an issue. I'll piece the engine together bit by bit with whatever $ I have, and once it's done, I'll swap it into my car. I don't have much of a choice, because I definitely can't afford to do it all at once. Anything I can do myself, I'll do. I don't like leaving my car in a stranger's care.

_________________
BCoN wrote:
Real men row through gears.


Project Fuego: http://forums.neons.org/viewtopic.php?f=51&t=339698&p=2761034#p2761034


Top
 Profile  
 
 Post subject: Re: Dodge Intrepid Engine?
PostPosted: Fri May 01, 2009 6:06 pm 
Offline
Master Neon Mechanic
User avatar

Joined: Thu Jun 15, 2006 2:52 am
Posts: 10501
Location: Phoenix, AZ it's quite hot outside.
ShadowOfBlood wrote:
I'm doing this over time, so budget's not really an issue. I'll piece the engine together bit by bit with whatever $ I have, and once it's done, I'll swap it into my car. I don't have much of a choice, because I definitely can't afford to do it all at once. Anything I can do myself, I'll do. I don't like leaving my car in a stranger's care.



http://www.dcrsrt.com/index.php?act=vie ... roductId=8

http://www.dcrsrt.com/index.php?act=vie ... roductId=5

http://www.agpturbo.com/product.php?pro ... 266&page=1

_________________
F&S Fabrication 2.4L power steering brackets
1999 2.4L coupe now Corn fed


Top
 Profile  
 
 Post subject: Re: Dodge Intrepid Engine?
PostPosted: Fri May 01, 2009 10:36 pm 
Offline
Neon Enthusiast
User avatar

Joined: Mon Apr 07, 2008 12:04 pm
Posts: 268
Location: Plymouth, PA
superD wrote:
ShadowOfBlood wrote:
I'm doing this over time, so budget's not really an issue. I'll piece the engine together bit by bit with whatever $ I have, and once it's done, I'll swap it into my car. I don't have much of a choice, because I definitely can't afford to do it all at once. Anything I can do myself, I'll do. I don't like leaving my car in a stranger's care.



http://www.dcrsrt.com/index.php?act=vie ... roductId=8

http://www.dcrsrt.com/index.php?act=vie ... roductId=5

http://www.agpturbo.com/product.php?pro ... 266&page=1


Is that engine block and head really cost-effective compared to just rebuilding a 2.4 to the same/better specs? I did manage to find that turbo $100 cheaper by googling it XD
I'm gonna have to save up quite a bit of $, I guess :)
Don't get me wrong, I'm not just trying to get a feel for what I might be in for. I FULLY intend to finish project Fuego :good:
It just might take some time, lol.

Edit: Oh, and wouldn't the RPMs have to be really high to make good use of that turbo?

_________________
BCoN wrote:
Real men row through gears.


Project Fuego: http://forums.neons.org/viewtopic.php?f=51&t=339698&p=2761034#p2761034


Top
 Profile  
 
 Post subject: Re: Dodge Intrepid Engine?
PostPosted: Fri May 08, 2009 1:02 pm 
Online
Neon Enthusiast
User avatar

Joined: Fri Mar 10, 2006 12:22 pm
Posts: 1422
Location: CoOkIe ToWn
Budget is always an issue when building a high hp car.

_________________
Image


Want to check my feedback?? viewtopic.php?f=36&t=276938&hilit=dmonday


Top
 Profile  
 
 Post subject: Re: Dodge Intrepid Engine?
PostPosted: Fri May 08, 2009 1:25 pm 
Offline
Neon Enthusiast

Joined: Thu Jul 10, 2003 9:46 pm
Posts: 1850
Location: Radcliff, KY
yeah...go to DCR and tell them to build ya somethin....if they can get srt-4s to run 10s with full interior...then imagine that engine in a 1st gen...lol

_________________
Image
Owns 3 Neons and 1 Non-Neon.....1 n/a and 3 boosted
Feedback:
http://forums.neons.org/viewtopic.php?f=36&t=354472
Damnit, Laverty wrote:
Even if we rode donkeys to work, it wouldn't change what yours looks like or people's impression of it.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 23 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style based on FI Subice by phpBBservice.nl