It is currently Sat Nov 01, 2014 2:49 am

All times are UTC - 7 hours [ DST ]





Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: SRT4: 2.6L STROKER w/ HTA3076R or BUILT 2.4L w/ HTA35R
PostPosted: Tue Oct 12, 2010 4:52 pm 
Offline
Neon Enthusiast

Joined: Tue May 20, 2008 9:33 am
Posts: 45
Location: Fairfield, CT
okay guys, im torn between these two set ups..

i have this theory that the 2.6L stroker with the HTA30R would spool like wild fire and make 600whp on race gas with a HUGE powerband. If i was hitting full boost by 3800rpm on my 2.4L in my SRT4 what RPM would it be safe to say that the 2.6L would spool the 30R at? 3200-3400? if its not worth the stroker hit to pick up the fast spool time from the 30R then i may just continue on with the Built 2.4L and Run on to a HTA3582R.. input please! thanks guys!


Top
 Profile  
 
 Post subject: Re: SRT4: 2.6L STROKER w/ HTA3076R or BUILT 2.4L w/ HTA35R
PostPosted: Tue Oct 12, 2010 5:30 pm 
Offline
Neon Enthusiast

Joined: Wed Sep 05, 2007 7:09 am
Posts: 412
Location: Newport News, VA
MTall190 wrote:
okay guys, im torn between these two set ups..

i have this theory that the 2.6L stroker with the HTA30R would spool like wild fire and make 600whp on race gas with a HUGE powerband. If i was hitting full boost by 3800rpm on my 2.4L in my SRT4 what RPM would it be safe to say that the 2.6L would spool the 30R at? 3200-3400? if its not worth the stroker hit to pick up the fast spool time from the 30R then i may just continue on with the Built 2.4L and Run on to a HTA3582R.. input please! thanks guys!


2.4/2.6 = 0.92307692307692307692307692307692
0.92307692307692307692307692307692 times 3800 = ~3500.

Safe to assume that's the difference, provided 2.4 is 2.4, and 2.6 is 2.6. Having actual numbers would give some bearing on that as well.

Also, that would be assuming 100% efficiency, and that both would have the same efficiency. It's pretty safe to say you'll lose a small amount of efficiency on the stroker, provided nothing else changes between the setups.


Top
 Profile  
 
 Post subject: Re: SRT4: 2.6L STROKER w/ HTA3076R or BUILT 2.4L w/ HTA35R
PostPosted: Wed Oct 13, 2010 3:40 pm 
Offline
Site Supporter
User avatar

Joined: Wed Feb 19, 2003 12:53 am
Posts: 1080
Location: Des Moines, IA
http://forums.neons.org/viewtopic.php?f=8&t=368769&p=3050297#p3050297

_________________
96' ACR 2.4T
05' SRT-4 ACR

noxneon wrote:
boost is for people that need to use lag as an excuse for being slow...


Top
 Profile  
 
 Post subject: Re: SRT4: 2.6L STROKER w/ HTA3076R or BUILT 2.4L w/ HTA35R
PostPosted: Thu Oct 14, 2010 11:32 am 
Offline
Neon Enthusiast
User avatar

Joined: Sun Jun 15, 2008 7:54 pm
Posts: 595
Location: Colorado
2.6 with a twin scroll gt37r and a soundperformance spool valve...... then go pick on some liter bikes

_________________
*OLD*95 4dr: SOHC.-253whp/211tq @ 10psi with Stage0's on 91.
1994 Lincoln Mark 8: rear mount H1c, Safc, 38lb's, e85, 8psi
1998.5 2wd cummins 24v: p-pump.....yadda yadda yadda
FOR SALE: 8.9:1 CP pistons/ Eagle H-beam rods: $300!!!!. Less than 2k miles!


Top
 Profile  
 
 Post subject: Re: SRT4: 2.6L STROKER w/ HTA3076R or BUILT 2.4L w/ HTA35R
PostPosted: Thu Oct 21, 2010 9:00 am 
Offline
Neon Enthusiast
User avatar

Joined: Sun Nov 27, 2005 11:18 pm
Posts: 1370
Location: Houston, TX
I was not hip to the spool valve idea. Very snappy part.

_________________
Black 97 2.4 Coupe Project Log

"Doubling down on stupid is not a particularly good idea"~Andrew Breitbart http://breitbart.com


Top
 Profile  
 
 Post subject: Re: SRT4: 2.6L STROKER w/ HTA3076R or BUILT 2.4L w/ HTA35R
PostPosted: Mon Oct 25, 2010 8:53 am 
Offline
Neon Enthusiast

Joined: Mon Jul 03, 2006 3:37 pm
Posts: 536
Location: ohio
Dumb newb question but what is a spool valve my mind says it goes in the exhaust? But how does it work though? Thanks.

_________________
00 neon atx- yard ornament, awaiting long needed build.
00 neon mtx-sold finally
96 neon atx- crashed and parted. parts for sale lots a good body parts.
98 neon mtx- d.d. right now. gonna be big when it happens.

**"Why wont u race my neon??" - "Cause, i dont want to lose to a neon..."**


Top
 Profile  
 
 Post subject: Re: SRT4: 2.6L STROKER w/ HTA3076R or BUILT 2.4L w/ HTA35R
PostPosted: Mon Oct 25, 2010 9:59 am 
Offline
Site Supporter
User avatar

Joined: Sun Jun 01, 2008 11:55 am
Posts: 3634
Location: Muskegon, MI
neontj wrote:
Dumb newb question but what is a spool valve my mind says it goes in the exhaust? But how does it work though? Thanks.



Google/ Youtube is amazing.

http://www.youtube.com/watch?v=_KNLKVgg8po

http://www.google.com/#hl=en&safe=off&& ... aade6fa416

_________________
1996 PR4 ACR Coupe - 2.4 & Boost & MS2 / 2002 Ram 1500 - Stock DD
Logging my projects
XboxLive Gamertag - MeetTejchma / My ForSale Thread


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 7 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style based on FI Subice by phpBBservice.nl