Search found 169 matches

by undead
Tue Dec 30, 2014 6:57 am
Forum: Project Logs
Topic: 1g Drag Car
Replies: 9
Views: 859

Re: 1g Drag Car

Stripping down my R/T http://i933.photobucket.com/albums/ad174/turbosohcneon/20141213_094947_zpsdlrogunz.jpg http://i933.photobucket.com/albums/ad174/turbosohcneon/20141213_120709_zps1dzkjmjo.jpg http://i933.photobucket.com/albums/ad174/turbosohcneon/20141213_135346_zpsor5hrkhl.jpg http://i933.photo...
by undead
Tue Dec 30, 2014 6:50 am
Forum: Project Logs
Topic: 1g Drag Car
Replies: 9
Views: 859

Re: Undead White on White 99 R/T

Car I will be getting most of my swap parts from. http://i933.photobucket.com/albums/ad174/turbosohcneon/20141221_085444_zpscpf1mnmk.jpg http://i933.photobucket.com/albums/ad174/turbosohcneon/20141221_085427_zpsht2vhuuq.jpg http://i933.photobucket.com/albums/ad174/turbosohcneon/20141221_084639_zpsif...
by undead
Sun Feb 16, 2014 9:16 am
Forum: Drivetrain,Driveline,Suspension
Topic: Nut size for struts?
Replies: 1
Views: 260

Nut size for struts?

I've been searching and I can't seem to find the nut THREAD size for the 3 nuts that hold the strut to the strut tower. Any info would be greatly appreciated. For a 99 r/t. Thanks in advance!
by undead
Sat Jul 27, 2013 11:42 am
Forum: 1st Gen
Topic: 2 of my injectors are not working..help
Replies: 5
Views: 158

2 of my injectors are not working..help

#1 injector isn't working, now #1 and #2 are not working. Injectors are fine, I swapped them around to make sure. Wiring doesn't look bad. I took all the tape off and nothing is broken or corroded. I'm at a loss. Any ideas on what I can do? Idles like crap. Hard to start.
by undead
Thu Jul 25, 2013 5:31 am
Forum: 1st Gen
Topic: have to hold gas to the floor to start car..runs poorly
Replies: 6
Views: 154

Re: have to hold gas to the floor to start car..runs poorly

99 5 speed dohc

Couldn't get the car to flash the codes.

I will check the injectors today after work
by undead
Wed Jul 24, 2013 5:34 pm
Forum: 1st Gen
Topic: have to hold gas to the floor to start car..runs poorly
Replies: 6
Views: 154

have to hold gas to the floor to start car..runs poorly

why would my car not start unless I hold the gas to the floor? happened all of a sudden. drove fine, parked it for like 4 hours then it started to not start unless I hold the pedal to the floor and it runs poorly now. any ideas?
by undead
Wed Feb 27, 2013 5:20 pm
Forum: Project Logs
Topic: 1g Drag Car
Replies: 9
Views: 859

Re: Undead White on White 99 R/T

Newer pics of the car will be in the next post 12/30/2014
by undead
Tue Jan 29, 2013 7:45 pm
Forum: Project Logs
Topic: 1g Drag Car
Replies: 9
Views: 859

Re: Undead White on White 99 R/T

Thanks. Going to keep it simple and clean.

No, this wasn't Jimmy's.
by undead
Tue Jan 29, 2013 2:34 am
Forum: Project Logs
Topic: 1g Drag Car
Replies: 9
Views: 859

1g Drag Car

Figure its time to update this build thread. I recently purchased a new turbo car to swap everything into my R/T over the next few months. Motor 2.0L bored 40 over Wiseco 8.8:1 pistons Eagle rods port/polished head crower springs and retainers crower stage 2 cams fidanza cam gears egr blockoff amm b...
by undead
Sun Sep 23, 2012 5:32 pm
Forum: Engine Swap
Topic: 2003 motor in 1999 wiring
Replies: 1
Views: 120

2003 motor in 1999 wiring

Will I just need the engine harness/ecu or do I need all the wiring all the way to the taillights and switches? It's going to be a summer only car so I don't need the defrost and heat controls ect.
by undead
Sat Sep 15, 2012 1:58 pm
Forum: Drag Racing
Topic: Fastest sohc?
Replies: 11
Views: 1805

Re: Fastest sohc?

Let's do both. Turbo and n/a. Want 1/4 mile times if possible.
by undead
Sat Sep 15, 2012 2:03 am
Forum: Drag Racing
Topic: Fastest sohc?
Replies: 11
Views: 1805

Fastest sohc?

Anyone have times for the fastest sohc cars? I know there is a all time list but doesn't say 2.4, 2.0, sohc, dohc, ect. Am just curious what the fastest sohc cars are if anyone knows. Thanks
by undead
Tue Jul 03, 2012 6:34 pm
Forum: Project Logs
Topic: Auto SOHC Turbo 500+whp 1g R/T...!!!
Replies: 16
Views: 1753

Re: Auto SOHC Turbo 500+whp 1g R/T...!!!

I am getting a same side intercooler that is equal to the same size as the bfmic srt intercooler i used to have. Items purchased this week -Intercooler -65mm mustang tb -plate for tb -switches -fuel pressure gauge -fuel fitting -push button start -wiring parts -battery cable Starting to wiring my ms...
by undead
Tue Jul 03, 2012 6:30 pm
Forum: Project Logs
Topic: Auto SOHC Turbo 500+whp 1g R/T...!!!
Replies: 16
Views: 1753

Re: Auto SOHC Turbo 500+whp 1g R/T...!!!

Here are some of the updated pics so far. Here is the bay primered, painted and dei heat wrapped firewall. http://i933.photobucket.com/albums/ad174/turbosohcneon/carstuff033.jpg?t=1341360375 http://i933.photobucket.com/albums/ad174/turbosohcneon/carstuff040.jpg?t=1341360395 http://i933.photobucket.c...
by undead
Fri Jun 29, 2012 2:42 pm
Forum: 1st Gen
Topic: Fuel rail quick connect
Replies: 2
Views: 146

Re: Fuel rail quick connect

Awesome thanks
by undead
Fri Jun 29, 2012 12:12 pm
Forum: 1st Gen
Topic: Fuel rail quick connect
Replies: 2
Views: 146

Fuel rail quick connect

What size is the fuel rail quick connect?

I need to order a quick connect to -6an fitting but need the size first.

Thank you!
by undead
Tue Jun 26, 2012 11:05 am
Forum: Project Logs
Topic: Auto SOHC Turbo 500+whp 1g R/T...!!!
Replies: 16
Views: 1753

Re: Auto SOHC Turbo 500+whp 1g R/T...!!!

Well here's an overdo update. Motor is assembled and installed. Waiting on a throttle body, new intercooler, slicks and finish wiring. I will post my new pics up tonight after work, painted the bay, heat wrapped the firewall and brake lines, mishimoto radiator is in. Intake manifold is on but just s...
by undead
Sun May 27, 2012 11:30 am
Forum: Project Logs
Topic: Auto SOHC Turbo 500+whp 1g R/T...!!!
Replies: 16
Views: 1753

Re: Auto SOHC Turbo 500+whp 1g R/T...!!!

Little update:

Ordered some small parts. Restrictor, alt belt, fuse panel, relays, oil cooler, spark plugs

Picking up hubs on Thursday!

Off all week so I'm hoping to get the bay done, painted and engine in and car on the ground.

I will take pics as its all done and moving along!
by undead
Tue May 22, 2012 8:00 am
Forum: Project Logs
Topic: Auto SOHC Turbo 500+whp 1g R/T...!!!
Replies: 16
Views: 1753

Re: Auto SOHC Turbo 500+whp 1g R/T...!!!

Transmission: 3 Speed Automatic Cheetah Reverse Manual Valve Body Clutch Packs, Ect Phantom Grip LSD DSS Stage 3 Axles Trans Cooler I bought the transmission from Lucas_Harman and he had over 500hp to it. I dont remember if he built it or got it from someone. I will need to upgrade it a little bit m...
by undead
Mon May 21, 2012 10:23 pm
Forum: Project Logs
Topic: Auto SOHC Turbo 500+whp 1g R/T...!!!
Replies: 16
Views: 1753

Re: Auto SOHC Turbo 500+whp 1g R/T...!!!

Yes it's strictly a bracket car. Why I went with the auto instead. 17psi spring in the wastegate. Hoping to run 30-35 psi. DCR headgasket will be here tomorrow so the motor will be assembled completely then. Turbo, manifold, wastegate and dumptube will be on as well Also, hoping to put the transmiss...
by undead
Mon May 21, 2012 4:44 pm
Forum: Project Logs
Topic: Auto SOHC Turbo 500+whp 1g R/T...!!!
Replies: 16
Views: 1753

Auto SOHC Turbo 500+whp 1g R/T...!!!

Well since I am getting closer to finishing this up I thought I would start a log for it. Here is everything it has/will have. 1999 Black Coupe R/T Automatic SOHC Turbo Engine: Out of ASPturbo's "Betty" car 2003 NGC Block Wiseco Pistons Eagle Rods Mopar Bearings Factory Crank 2001 Magnum H...
by undead
Wed Apr 25, 2012 7:29 am
Forum: 1st Gen
Topic: Power window do not work in r/t
Replies: 0
Views: 102

Power window do not work in r/t

I picked up a r/t and the power windows do not work. If I supply power directly from the battery and hold the switch up or down and touch it to the pin it goes. Power locks work, power mirrors work, power sunroof works. What supplies the windows with power? I've tried 2 different switchs and still a...
by undead
Sat Mar 10, 2012 4:59 am
Forum: Drivetrain,Driveline,Suspension
Topic: major hub/bearing and brake questions front and rear
Replies: 17
Views: 583

Re: major hub/bearing and brake questions front and rear

I wouldn't blame anyone. Rear hub assemblies are cheap. Was just seeing if anyone had done this before. Going to be trial and error i already know that.
by undead
Mon Mar 05, 2012 4:02 pm
Forum: Drivetrain,Driveline,Suspension
Topic: major hub/bearing and brake questions front and rear
Replies: 17
Views: 583

Re: major hub/bearing and brake questions front and rear

oh um would they work with dss axles?
by undead
Mon Mar 05, 2012 3:11 pm
Forum: Drivetrain,Driveline,Suspension
Topic: major hub/bearing and brake questions front and rear
Replies: 17
Views: 583

Re: major hub/bearing and brake questions front and rear

Ok awesome and thank you for helping me!!

so to be clear so i understand i need:

1. shadown knuckles
2. caravan hub/bearings
3. caravan rotors
4. caravan calipers
by undead
Mon Mar 05, 2012 2:49 pm
Forum: Drivetrain,Driveline,Suspension
Topic: major hub/bearing and brake questions front and rear
Replies: 17
Views: 583

Re: major hub/bearing and brake questions front and rear

Ok I got on the computer and looked at the links. So do I have to go find the shadow knuckles or can i just use the bearing for the shadow and what year caravan? assuming the older ones like the shadow? and what can i use in the rear?
by undead
Mon Mar 05, 2012 1:26 pm
Forum: Drivetrain,Driveline,Suspension
Topic: major hub/bearing and brake questions front and rear
Replies: 17
Views: 583

major hub/bearing and brake questions front and rear

This is all for my drag car. I want to switch to the eclipse bolt pattern of 5x114.3 for wheel reasons and i have to redo my entire brake system so why not. Here are my questions and i hope you all can help me so i can settle all this confusion in my head. Front 1. Are the hubs(besides bolt pattern)...
by undead
Sat Feb 18, 2012 4:24 pm
Forum: 1st Gen
Topic: Bolt sizes needed ASAP!
Replies: 2
Views: 133

Re: Bolt sizes needed ASAP!

2.0 2003
by undead
Fri Feb 17, 2012 7:24 am
Forum: 1st Gen
Topic: Bolt sizes needed ASAP!
Replies: 2
Views: 133

Bolt sizes needed ASAP!

I need to know these bolt sizes so I can put my motor together.

1. Oil pan to block
2. All timing bolts
3. Timing cover
4. Crank pulley

I did not see these in the bolt guide sticky. Thanks
by undead
Mon Feb 06, 2012 8:18 am
Forum: Drag Racing
Topic: Launching ATX
Replies: 15
Views: 1158

Re: Launching ATX

Do you, or can you get pics of it? I am a visual person so it's hard to picture it in my head.
by undead
Sat Feb 04, 2012 2:08 pm
Forum: Drag Racing
Topic: Launching ATX
Replies: 15
Views: 1158

Re: Launching ATX

What line locks are you using? Do I need 2? One for each brake?
by undead
Tue Jan 31, 2012 11:02 am
Forum: Engine Swap
Topic: 2003 ngc motor in a 99..have a couple questions
Replies: 3
Views: 197

Re: 2003 ngc motor in a 99..have a couple questions

I am going to run full megasquirt, it's going in my drag car. 2.0l, just wanted to make sure it bolted in normally or if I needed custom mounts or anything. Is everything the same besides the crank and trigger?
by undead
Tue Jan 31, 2012 6:20 am
Forum: Engine Swap
Topic: 2003 ngc motor in a 99..have a couple questions
Replies: 3
Views: 197

2003 ngc motor in a 99..have a couple questions

I am putting a 2003 built ngc motor into my 99 and I have a couple questions.

1. Does it bolt in the same as 1gn? Or how does it bolt in? Cant imagine it bolting in differently but I want to be sure.
2. Are the headgaskets different from any other sohc headgasket?
by undead
Wed Jan 25, 2012 5:17 pm
Forum: Drag Racing
Topic: Launching ATX
Replies: 15
Views: 1158

Launching ATX

For those running an atx, what are you using at the line? trans brake? line lock? 2 step? hold brake hit gas? ect. Just want to see what people are using mostly. Thanks.
by undead
Tue Jan 24, 2012 7:06 pm
Forum: Drag Racing
Topic: What suspension for 10's?
Replies: 21
Views: 1211

Re: What suspension for 10's?

yeah i have been noticing that.
by undead
Tue Jan 24, 2012 6:18 pm
Forum: Drag Racing
Topic: What suspension for 10's?
Replies: 21
Views: 1211

Re: What suspension for 10's?

sooooo what are you guys running for suspension??? coils?? or what? thanks.
by undead
Mon Jan 23, 2012 6:50 pm
Forum: Drag Racing
Topic: What suspension for 10's?
Replies: 21
Views: 1211

Re: What suspension for 10's?

well what I mean by "squat" is of course rear end going down but yes i mean how to keep the front from going up. I assumed keeping the squat down would help keep the front from lifting so bad. I could be wrong but i am still trying to learn.
by undead
Thu Jan 19, 2012 3:03 pm
Forum: Personal Sales Feedback
Topic: Monday....Top of the line seller!!
Replies: 2
Views: 175

Monday....Top of the line seller!!

Bought the 1:1 from him. Crazy fast shipping like 1 day. Part looks amazing. Thanks man!!

Go to advanced search