2.4 swap all motor times

The Drag Racing Board is the home of detailed discussions of sanctioned drag strip competition, including questions, tips-and-tricks, and time slips. Please note that street racing does not belong on this board.
Post Reply
v8power
Neon Enthusiast
Posts: 67
Joined: Wed Feb 06, 2013 9:31 pm

2.4 swap all motor times

Post by v8power » Thu Oct 01, 2020 6:57 pm

I'm drag racing my neon tomorrow night at maple grove and want to know if there's any tips. Car is a 98 r/t 2.4 swap with 10:1 compressor, .20 over, ported head, crower s1, mopar ecu 60mm Tb, iceman, indy intake, longtube ect. Just wondering what I may run. I'm on street tires, hoping for low 14s high 13s. 3.94 trans.

User avatar
Wolfemancola
Neon Enthusiast
Posts: 88
Joined: Tue Apr 26, 2011 8:42 pm
Location: Moncton, New Brunswick, Canada

Re: 2.4 swap all motor times

Post by Wolfemancola » Fri Oct 02, 2020 2:54 pm

http://dragsite.tripod.com/id123.htm
on this site if you scroll down to I think it's the 17th car down, there is a Neon that use to race at my local track years ago (it says 2005) and he says it is a 1996 Neon 2.4L swap N/A and it ran a 13.0 at 107mph. I've never seen the car, but back then I was more into v8's. I'll post the info he included:

Name: Mike Swift Hometown: Minto NB
Car number and class: SM1975
Make /Year / Model / Colour: 1996 Dodge Neon , Nitro-Yellow-Green
Engine Specifications: 2.0 4cyl N/A ALL Motor..no N2O No Boost
Atlantic Canada's Fastest/Quickest All Motor Neon.
2.4 Stock bottom end swap,NRGY Heads pro race package DOHC cyl. head w/oversized s/s valves ,teflon Valve seals,Titanium retainers,Crane sohc Valve springs,Crane #18 Drag Cams,AEM adj. Cam Gears, A/FX Race ECU,A/FX Long
Tube Header,Fast Fabrications Intake Manifold,60MM Throttle Body w/CAI, Ford
24lb injectors. Transmission/Tires Centerforce Dual Friction Clutch ,Stock 355
open diff transmission with STOCK AXLES,23*8*15 M&H Racemaster Slicks with
AR Wheels
Best ET / MPH: [email protected] Home Track: Miramichi Dragway
Personal Race Schedule: Full season in 2005
1998 R/T blue w/ stripes - Mopar ECU, Crane 12 cams, Mopar STS, Iceman, ATX TB, TTI "Mid-length" header
1995 ACR Plymouth Coupe
1999 Neon EX - 2.4L, Crane 18 Cams, Ported Head, JE 10.5:1 bored .020 over, eagle rods, no balance shafts, 2.7 followers
1998 Neon EX coupe - a lot of R/T stuff, 4 wheel disc, West Wings body kit (Future project)
2001 R/T black - (Sold)
1998 Coupe DOHC 5-speed - Mopar ECU, ATX TB, Header, Mopar STS, 2200lbs, fastest $400 winter beater i've seen

User avatar
vivix
Neon Enthusiast
Posts: 287
Joined: Sun Oct 14, 2012 5:37 pm
Location: Stratford, CT

Re: 2.4 swap all motor times

Post by vivix » Thu Oct 22, 2020 11:40 am

v8power wrote: Thu Oct 01, 2020 6:57 pm I'm drag racing my neon tomorrow night at maple grove and want to know if there's any tips. Car is a 98 r/t 2.4 swap with 10:1 compressor, .20 over, ported head, crower s1, mopar ecu 60mm Tb, iceman, indy intake, longtube ect. Just wondering what I may run. I'm on street tires, hoping for low 14s high 13s. 3.94 trans.
Howd ya do?
1995 Light Iris Coupe- Magnum SOHC/ 5-speed
2019 Orange Spice Fiesta ST

Post Reply

Return to “Drag Racing”

Who is online

Users browsing this forum: No registered users and 2 guests